Friday, June 05, 2020

New Products

2005 newProducts 01

Frequency Multiplier 

Cernexwave’s CFM series active frequency multipliers cover the frequency range of 10 MHz to 500 GHz. They can be designed to multiply an RF signal 2, 3, 4 or as many as 36 times with our custom multiplier chain assemblies. These multipliers utilize state of the art MIC and MMIC technologies to provide highly stable, reliable and efficient frequency extenders for system applications.

The X12 model CFMV1V1X1210 above has an input frequency of 10MHz and an output frequency of 120MHz. It is powered by +12VDC at 400mA with 10dBm of input and output power at the SMA Female connectors.


2005 newProducts 02

Precision Right Angle Adapters

Withwave’s Precision Test Adapters with right angle types are designed based on precision microwave interconnection technologies. These adapters are manufactured to precise microwave specifications and constructed with male and female gender on both side. The precision microwave connector interfaces ensure an excellent microwave performance up to 40 GHz.


2005 newProducts 03

Spectrum Analyzer Extension Modules

OML can extend the frequency range of your existing spectrum analyzer to millimeter wave frequencies with our single diode unbalanced harmonic mixers. Harmonic mixers are available for the waveguide bands between 18 and 325 GHz. These frequency extension modules are compatible with most spectrum analyzers that offer optional external mixer access. By substituting the harmonic mixer for the existing microwave input, you can expand your spectrum analyzer frequency coverage for millimeter wave measurements.


2005 newProducts 04

Waveguide Shorts, Shims

Fairview’s new line of waveguide shorts and shims includes 36 models offered in waveguide sizes ranging from WR-430 to WR-10. This new line is ideal for use in RF test and measurement applications and provides superior RF performance. Waveguide shims and shorts, or shorting plates, are commonly included in calibration kits and they are used in calibration applications. Waveguide shims can also be used to bridge gaps between waveguide components.

These waveguide shims and shorts are compatible with square and round UG cover and CPR-style flanges and are available in both copper and aluminum versions.

Fairview Microwave

2005 newProducts 05

Front-End Module

Skyworks is pleased to introduce the SKY5®-5242-11 a dual 2.4 GHz, 802.11ax high-linearity, high-efficiency front-end module (FEM) designed for Wi-Fi 6 enabled devices including handsets, tablets and mobile devices supporting WLAN and Bluetooth® protocols. This highly integrated FEM includes two transmit and receive chains, an extremely low EVM floor power amplifier, low noise amplifier with bypass, and a SP3T antenna switch. The three transmit modes for high linearity, high efficiency and low gain provide optimal performance. The SKY55242-11 builds on Skyworks’ portfolio of revolutionary products for 5G applications.


2005 newProducts 06

RF and Microwave Components Since 1982

Herotek offers a comprehensive line of Detectors, Comb Generators, Limiters, Switches, GaAsFet Amplifiers (Broadband, Low Noise, and Power) and integrated subsystems of many types, including up and down converters, multipliers, harmonic mixers, and transceivers.

Herotek has been a quality supplier of RF and Microwave components since 1982. It is a broad-based, high technology company supplying parts for the Military, Industrial and Commercial markets with designs from DC to 75 GHz. It offers standard products as well as thousands of custom designs, and is happy to match existing products.


2005 newProducts 07

Wideband LNA

ENA-155T is a wideband low noise amplifier, with frequency range of 2 to 18GHz. It is operated on a single +12V to +15V DC power supply with gain of 17dB and typical noise figure 3.5dB. Product in stock for immediately delivery.

RF Bay

May 2020

2005 HFE cover

The May 2020 Online Edition is now available for viewing and download!

Download May HFE PDF



Web Exclusives


AWR logo


eBook: A Designer’s Primer on Radar Systems

Combined with advances in phased-array antennas and integration technologies, radars are moving beyond military/aerospace markets to address a host of commercial applications. This primer showcases how NI AWR software provides designers with the advanced modeling and simulation technologies needed to meet the challenges of all types of radar system design.

A Designer’s Primer on 5G Communications

Recent advances in NI AWR software are helping designers develop the antenna and RF front-end components that are making 5G a reality. This primer offers content on the innovative wizards and synthesis technologies that enable engineers designing 5G communications systems to deliver cost-effective, high performance, and high-reliability products to market.

Contact Us

Gary Rhodes
Advertising Sales - Mid Atlantic
Fax: 631-667-2871

Scott Spencer

Tim Burkhard
Associate Publisher/Managing Editor
Fax: 707-544-9375

Stuart Dale
Advertising Sales – New England

Jeff Victor
Advertising Sales - Western U.S. - New Accounts
Fax: 509-472-1888

Sam Baird
Advertising Sales - UK and Europe
+44 1883 715 697
Fax: +44 1883 715 697

Joanne Frangides
Advertising Sales - New Accounts & Product Showcase
Fax: 201-666-6698