Sunday, March 18, 2018
Text Size


image image image image image image image image image image


Marki Microwave offers a DC to 35 GHz amplifier in a bare die package, with 14 dB of gain and +22 dBm saturated output power. The ADM-5974CH provides efficient optimized LO drive to all Marki Microwave mixers, ideal for electronic warfare, clock distribution, or test and measurement applications. The design allows for single-supply DC biasing for customer convenience or for optional negative bias to increase even harmonic rejection and decrease DC current consumption. ADM-5974CH is built with a low-noise GaAs pHEMT process to provide competitive phase noise performance. 

Marki Microwave

SPDT Switches

BeRex announced the BSW6321 and BSW6421 high isolation, high linearity, low insertion loss, SPDT switches optimized for Wi-Fi, CATV and 5G applications. Using a single 2.7V-5.5V supply voltage, the BSW6321 and BSW6421 switches provide a wide 1 to 6000 MHz frequency range when used in either 50 Ohm of 75 Ohm systems. They utilize a patent-pending technology that provides the industry’s highest isolation of 50dB at 2.45GHz, together with a high input P1 capability of 39dBm and a linearity of 64dBm.



Passive Plus, Inc. (PPI) is now offering the 0708N (.065” x .080”) series capacitor. These parts exhibit Low ESR/ESL, Low Noise, High Self-Resonance as well as ultra-stable performance over temperature. These capacitors are 100% RoHS compliant and also available in Tin/Lead termination. Usually used for wireless broadcasting equipment, mobile base stations, GPS, MRI, and Radar applications and offered in magnetic and non-magnetic terminations.

Passive Plus

WLAN Signaling Tester

The R&S CMW270 wireless connectivity tester is the world’s first tester to emulate all IEEE 802.11a/b/g/n/ac standards, including 802.11ax. In signaling mode, users can test the RF properties of WLAN stations under real-world conditions. The tester presents a solution based on the well-established R&S CMW270 wireless connectivity tester, which has a newly extended bandwidth of 160 MHz. Users also need the new hardware option, the R&S CMW-B100H advanced measurement unit, which allows them to emulate an 802.11ax access point to test the RF properties and performance of a STA under realistic conditions.

Rohde & Schwarz

Patch Cords

MilesTek released a new series of shielded industrial Ethernet patch cords with low-smoke zero-halogen (LSZH) jackets to address demanding military and industrial Ethernet connectivity applications. These robust LSZH Category 5e-rated assemblies can be used in multiple applications, including mobile and fixed military communications networks, automation and manufacturing, oil and gas, or in any application where harsh environments exist.


SPDT Switch

RFMW, Ltd. announced support for a high power SPDT switch from RFuW Engineering. The MSW2T-2040-193 high power PIN diode switch handles 150 watts of average (CW) power across a band width of 50MHz to 1GHz. Peak power handling is up to 550W. Offered in a surface mount (SMT) package measuring 5x8x2.5mm, the MSW2T-2040-193 symmetrical switch serves radar T/R module applications along with switch filter banks and Mil-Com radio applications where high-power handling is needed.


2 - 18 GHz Wideband Transceiver

Norden Millimeter introduces the NUDC2-18/1.3-2.3 Wideband Microwave Transceiver in a low-SWaP 3U module. The NUDC2-18/1.3-2.3 is a dual conversion Transceiver providing 2-18 GHz operation in a versatile OpenVPX platform. The NUDC2-18/1.3-2.3 includes internal LOs which provide an instantaneous IF bandwidth of 1 GHz and exceptional Noise Figure: Down Converter NF= 6dB max, Up Converter NF=15dB max. Both the RF and IF paths include variable attenuation. The NUDC2-18/1.3-2.3 is digitally controlled by RS-485.

Norden Millimeter

In-Series Adapters

SGMC Microwave’s 3.5mm series are precision grade connectors designed for use with microwave applications requiring excellent performance up to 34 GHz. SGMC offers an extensive line of 3.5mm precision adapters, receptacles, and cable connectors for various semi-rigid and flexible coaxial cables. Frequency Range:  DC to 34 GHz; Mechanically compatible with SMA & 2.92mm connector series; Ruggedized construction for repeatability and reliability; Phase matched adapters; Captivated Center Contact (One piece swept right angle contacts); Low VSWR and insertion loss (1.25:1 Max / Typically under 1.18:1 up to 34 GHz); same-day shipping.

SGMC Microwave


The NuPower Xtender™ series of solid state bidirectional amplifier (BDA) modules is ideal for extending the communication range of half-duplex transceivers. Leveraging the latest Gallium Nitride (GaN) technology and market-leading design miniaturization techniques, Xtender amplifiers are designed to meet the demanding needs of aerospace, defense and industrial markets. NuPower Xtender’s combination of power efficiency and miniature, ruggedized packaging makes them ideal for size, weight, and power-constrained (SWaP) broadband telemetry, ISR, and tactical communications systems.

NuWaves Engineering

Amps and More

Herotek has been a quality supplier of RF and Microwave components since 1982. Herotek is a broad-based, high technology company supplying parts for the Military, Industrial and Commercial markets with designs from DC to 75 GHz. Herotek offers Detectors, Comb Generators, Limiters, Switches, GaAsFet Amplifiers (Broadband, Low Noise, and Power) and integrated subsystems of many types, including up and down converters, multipliers, harmonic mixers, and transceivers.


Current Issue

This is a SEO version of 2018-02 High Frequency Electronics Page 1
To view this content in Flash, you must have version 8 or greater and Javascript must be enabled. To download the last Flash player click here

MM-Wave Update and More

1802 mmWave 01


Model SAT-363-25028-C1 is a WR-28 orthomode transducer (OMT) that operates between 30 and 42 GHz. It separates a circular or elliptical polarized waveform into two linear, orthogonal waveforms or combines two linear polarized waveforms into one circular or elliptical polarized waveform or vice versa. The OMT also supports either vertical or horizontal polarized waveguide forms with more than 30 dB cross polarization rejections. It shows high port isolation while providing a low insertion loss. The OMT is configured with a 0.250” diameter circular waveguide for the antenna port and two WR-28 waveguides for the horizontal and vertical ports.

SAGE Millimeter

1802 mmWave 02

Balanced Mixer

Model SFB-50375308-1519KF-N1 is a V-band balanced mixer with U band LO port that utilizes high performance GaAs Schottky beam-lead diodes and a balanced circuit configuration to offer superior RF performance. With an RF frequency of 50 to 75 GHz and an LO frequency of 40 to 60 GHz, the mixer supports the full waveguide band operation for both ports. It also offers an extremely broad IF bandwidth from DC to 35 GHz, a conversion loss of 8 dB typical, and a high RF to LO port isolation of 30 dB, respectively.

SAGE Millimeter

1802 mmWave 03

VNA Extension Modules

Compatible with most Vector Network Analyzers, OML’s frequency extension modules connect to your existing test port(s)and leverage the inherent microwave network analyzer’s performance and features to display two-port S-parameters: S11, S21, S12 and S22. Covering from 50 to 500 GHz we offer various module setups and options such as attenuation, IMD and extended ranges.


1802 mmWave 04

Power Sensors Include Internal and External Triggering

LadyBug’s LB5900 and LB480A Series USB RF Power Sensors include internal and external triggering at no upcharge. Users can trigger time-gated measurements, trigger the beginning of an average power measurement, or other uses. Internal level and polarity can be set to suit the particular application. The sensors also feature trigger output allowing the trigger signal to be passed to other instruments.

LadyBug Technologies LLC

1802 mmWave 05

Micro Lambda Wireless: YIG Products

All of our products utilize a YIG single crystal structure, a ferrimagnetic material that resonates at microwave frequencies from 500 MHz to 50 GHz. The frequency is directly proportional to the applied magnetic field of the YIG material. For oscillators, a single YIG sphere is used as the resonator element in a tank circuit to generate very wide tuning sources with excellent phase noise characteristics. For filters, a number of YIG spheres are used as stages (poles) in both band-pass and band-reject filter configurations.

Micro Lambda Wireless

1802 mmWave 06

Broadband 6 GHz RF Up and Downconverters

SignalCore’s high performance triple stage heterodyne 100 kHz to 6 GHz up/downconverters are cost effective, compact and designed for seamless RF integration. Its output IF frequency can be tuned to center between 50 MHz and 500 MHz, and also selectable for 1250 MHz. Flexible IF bandwidths of 80 MHz, 160 MHz, and 320 MHz can be selected.


1802 mmWave 07

Low-Cost Microwave Vector System

GH University of Science and Technology researchers in Krakow, Poland have developed a novel low-cost microwave vector system using NI AWR Design Environment. The system is dedicated to monitoring the properties of liquid samples, for example, estimation of fat content in ultra-high temperature processed milk. The challenge was to design a system composed of a differentially-fed coupled-line sensor and five-port correlator that would enable measurement of both magnitude and phase of a signal dependent on the material under test.

National Instruments

1802 mmWave 08

RF Coaxial Relays

The RF Relay Store,, owned and operated by RelComm Technologies,, Salisbury, Maryland, has recently expanded the product offering to over thirty-five (35) line items of standard building block RF Coaxial Relays. The online store allows for purchase of as few as one (1) device or as many as ten (10) devices per line item. Expanded product offering includes 1P1T, 1P2T, 1P4T up to 1P10T, failsafe and latching options from PCB mount to SMA and N connectorized devices.

RelComm Technologies

Febuary 2018

1802 HFE cover

The February 2018 Online Edition is now available for viewing and download!

Download February HFE PDF



Web Exclusives

Coming Events

September 9-15, 2017
      MILCOM 2017
October 23-25, 2017
October 8-13, 2017
Washington DC
November 28-30, 2017
    2018 IEEE Radio and Wireless Symposium
Garden Grove
January 15-18, 2018