Wednesday, September 23, 2020
Login

Hot Products

image image image image image image

Pick Off Tees/Resistive Tap: 30 dB Tapping

Pick Off Tees, also known as Resistive Taps, are unique in that they allow coupling of a signal over a very flat, wide bandwidth, and can be used in much smaller configurations than stripline couplers. These non-directional devices are a cost-effective solution when monitoring is required. The PT30-8 is part of Werbel Microwave’s catalog of Pick-Off Tees. The device offers flat, 30-dB tapping over the bandwidth DC to 8 GHz. Compact enclosure available with SMA female connectors.

Werbel Microwave
werbelmicrowave.com

SMA Female to SMA Female (Bullet) In-Series Adapters

• Frequency Range: DC to 18 GHz / Usable up to 26.5 GHz (MODE FREE)

• Electrical: 50 Ohm, Low VSWR & Low Insertion Loss

• VSWR: 1.15:1 Max @ 18 GHz (Under 1.25:1 up to 26.5 GHz)

• Materials: Passivated 303 Stainless Steel or Gold Plated Beryllium Copper available

• Dielectric: Fluorocarbon (PTFE) Epoxy Captivated

• Overall Length 0.508” (12.90mm)

• Available for immediate delivery – Same day shipping for all stock items

SGMC Microwave
sgmcmicrowave.com

Rubidium Oscillator

The LPFRS is a low-cost, low-profile and high-performance rubidium oscillator source. It is compatible to the FEI 5650 Rb model and comes in a low-profile package and 2 outputs. It features low phase noise performance.

The LPFRS is RoHS compliant through the NIE exemption of the RoHS Directive 2011/65/EU, Article 4.6/Annex III-7(b), allowing exemptions of Pb free soldering for specific applications such as telecom, including servers, storage array systems, network infrastructure equipment for switching, signaling, transmission, and network management for telecommunications.

Oriola
oriola.com

Microwave, MM-Wave Amps

B&Z Technologies' engineers have been pioneers in the design of the state of the art microwave and millimeter wave amplifier technology for more than thirty years. Their design and manufacturing concepts have been instrumental in the establishment of some of today's leading microwave and millimeter wave amplifier manufacturers.

In the product pages which follow you will find several of the amplifiers we manufacture. The units listed cover very wide bandwidths. These units may be optimized over specified bandwidth to achieve lower noise figure and higher output power to meet the exact requirements of our customers. B&Z designs and supplies high reliability, ultra wideband, low noise, medium power, microwave and millimeter wave amplifiers. Most of these are capable of operating at cryogenic temperatures.

B&Z Technologies
bnztech.com

Band-Reject Filters

Our MLFR Series YIG band-reject, or notch filters, are the best in the industry. They offer 2 to 20 GHz frequency range and come in octave, multi-octave and full wideband designs. Our YIG filter designs are offered in an industry standard 1.4” or 1.7" cube package with SMA connectors. Precise notch depths of 40 dB, with up to 16 stages in some models, are all available.

Our MLUN Series of YIG band-reject filters cover the frequency range of 500 MHz to 18 GHz in different bands. These filters offer excellent notch depth and precise bandwidths for rejection of unwanted signals. 3 dB bandwidths are 175 MHz with 60 dB bandwidths of 5 to 10 MHz are available in standard designs. These filters are well suited for broadband receivers and a variety of EW system applications. Standard configuration are provided and can also be ordered with an Analog, TTL Digital or Serial Driver.

Micro Lambda Wireless
microlambdawireless.com

Reflective Switch

PMI Model No. P2T-8G12G-40-R-570-TFF-1D5KW-120W is a Single Pole, Two Throw, Reflective Switch that operates over the 8.0 to 12.0 GHz frequency range; power handling of 1.5 kW Peak (120 W CW); a typical switching speed of 1.1 µs. Unit offers TNC female connectors, a 9-Pin Micro-D female connector in a housing measuring 2.00" x 2.00" x 0.75".

Planar Monolithics Industries
pmi-rf.com

New Products

2008 newProducts 01

Coax Cable

Times Microwave Systems’ new PhaseTrack® 047 is a phase stable, highly flexible, micro coaxial cable. Designed for DC to 70 GHz frequency ranges, this cable meets the size and performance needs of Spaceflight, Health Care, 5G and Telecom, Test and Measurement, and many other “in-the-box" applications.

The smaller scale PT-047 is an ideal choice for dense or clustered cable configurations with high flexure requirements. It is a flexible alternative to the 047 Semi-Rigid and demonstrates superior phase stability over temperature.

Times Microwave
timesmicro.com

2008 newProducts 02

Hi-Q ESR Capacitors

 

PPI is known for their outstanding Customer Service, high quality product line, competitive pricing, and quick delivery times. While other companies are pushing out their lead-times for product delivery, PPI is committed to delivering our quality components as quickly as possible. As PPI tries to keep a full inventory in stock, depending on the component and quantities needed, delivery times can be stock to 8 weeks.

 

Passive Plus

passiveplus.com

2008 newProducts 03

Delta: Manufacturing Marvel

Delta Electronics Mfg. Corp., headquartered in Beverly, MA was spotlighted as a “Manufacturing Marvel” on Fox Business Network last month. We were highlighted as we are a true manufacturing, USA based company that is thriving in a world of increased foreign competition. We are a world class manufacturer of RF, Microwave, and millimeter wave products and assemblies, used in a variety of highly sophisticated Commercial, Medical, Military and Aerospace subsystems.

Delta Electronics
deltarf.com

2008 newProducts 04

Cadence AWR Design Environment V15

Version 15 (V15) offers new and enhanced technologies that provide greater design efficiency and first-pass success to engineering teams developing or integrating III-V ICs, multi-technology modules, and PCB assemblies for 5G, automotive, and aerospace/defense applications.

Engineering productivity is improved with new analyses, faster and higher-capacity simulation technologies, time-saving design automation, and 5G New Radio (NR) compliant test benches that support power amplifier and antenna/array design, electromagnetic modeling, and RF/microwave integration across heterogenous technologies.

Cadence AWR
awr.com

2008 newProducts 05

Advanced Channel Emulator – ACE9600

The ACE9600 builds upon the SLE900 by adding Payload impairment capability, synchronization of up to 16 channels, 12 tap multipath fading, and 600 MHz of instantaneous bandwidth. The instrument can be configured with 1 to 4 channels. Link impairments include delay, Doppler, attenuation, phase offset, AWGN, frequency hopping, and multipath fading. Payload impairments include IMUX/OMUX emulation (amplitude and delay distortion), amplifer compression effects (AM/AM and AM/PM), phase noise, and spurious signals. Parameters can be set to fixed values in Static mode, or continuously changed in real time in Dynamic mode without phase discontinuities.

dBm
dbmcorp.com

August 2020

2008 HFE cover

The August 2020 Online Edition is now available for viewing and download!

Download August HFE PDF

 

Search

Web Exclusives

2020 08 timesMicro

 

Times Microwave Systems Introduces

The New Generation of Micro Coaxial Cables

 

WALLINGFORD, CT Times Microwave Systems’ new PhaseTrack® 047 is a phase stable, highly flexible, micro coaxial cable. Designed for DC to 70 GHz frequency ranges, this cable meets the size and performance needs of Spaceflight, Health Care, 5G and Telecom, Test and Measurement, and many other “in-the-box" applications.

The smaller scale PT-047 is an ideal choice for dense or clustered cable configurations with high flexure requirements. It is a flexible alternative to the 047 Semi-Rigid and demonstrates superior phase stability over temperature.

This cable utilizes Times Microwave Systems’ proprietary TF4® dielectric material, eliminating the problematic non-linear phase performance of PTFE through 15-25ºC and need for time-consuming extra recalibration steps or software-based phase corrections. Designed with the same diameter of the standard Semi-Rigid 047, it pairs perfectly with popular connector options:

  • 2.92 mm
  • 2.40 mm
  • SMA
  • SMP
  • TLMP

Have a tough challenge? Email techquestions@timesmicro.com for help.

About Times Microwave Systems

A pioneering brand in innovative RF and microwave interconnect assemblies, cables and connector designs, Times Microwave Systems is a division of Amphenol. The company has more than 70 years of experience in the industry and offers the most comprehensive suite of products in the market. TMS continues to rapidly expand its portfolio by addressing defense, medical, telecommunications, precision test, and space applications. With a staff of more than 100 engineers and a global manufacturing presence, TMS is uniquely qualified to produce the right solution for our customers' complex requirements.

 

Delta Electronics: Manufacturing Marvel

Delta Electronics Mfg. Corp., headquartered in Beverly, MA is being spotlighted as a “Manufacturing Marvel” on Fox Business Network, on July 30, 2020. The two minute airing will take place between 9:30 and 9:45 PM. Delta is a true manufacturing, USA based company that is thriving in a world of increased foreign competition. We are a world class manufacturer of RF, Microwave, and Millimeter wave products and assemblies, used in a variety of highly sophisticated Commercial, Medical, Military and Aerospace subsystems.

 

 AWR logo

 

eBook: A Designer’s Primer on Radar Systems

Combined with advances in phased-array antennas and integration technologies, radars are moving beyond military/aerospace markets to address a host of commercial applications. This primer showcases how NI AWR software provides designers with the advanced modeling and simulation technologies needed to meet the challenges of all types of radar system design.

awr.com/resource-library/designers-primer-radar-systems

A Designer’s Primer on 5G Communications

Recent advances in NI AWR software are helping designers develop the antenna and RF front-end components that are making 5G a reality. This primer offers content on the innovative wizards and synthesis technologies that enable engineers designing 5G communications systems to deliver cost-effective, high performance, and high-reliability products to market.

awrcorp.com/register/custom.aspx?crg=_whitepapersystem